Von Schaewen GmbH

+++ OPEN DIE FORGED PART – PROFILED AND HEAT TREATED AND FINISH MACHINED +++

➡️ raw size 500 x 1150 x 1600 mm
➡️ rectangle weight approx. 7,5 t.
➡️ net weight after profiling 4,8 t.
➡️ net weight after machining 2,2 t.
➡️ P355NH
➡️ 3.1

summer holidays are coming

+++ BUT THERE ARE STILL SOME BATCHES WAITING FOR THE DISPATCH +++

➡️ here you can see some nice flame cutted profiles
➡️ from our factory in Essen-Vogelheim waiting for the transport to our customers

+++ OPEN DIE FORGED PART – PROFILED AND HEAT TREATED +++

➡️ raw size 500 x 1150 x 1600 mm
➡️ rectangle weight approx. 7,5 t.
➡️ net weight after profiling 4,8 t.
➡️ P355NH
➡️ 3.1

+++ NICE FLAME CUTTED PROFILES OUT OF FORGED PLATES +++

left hand side
➡️ raw size 450 x 1800 x 2450 mm
➡️ rectangle weight approx. 16 t.
➡️ net weight after profiling 10,8 t.
➡️ 25CrMo4 +QT
➡️ 3.2 DNV

right hand side
➡️ raw size 730 x 1640 x 2020 mm
➡️ rectangle weight approx. 20 t.
➡️ net weight after profiling approx. 13 t.
➡️ S355J2G3
➡️ 3.1

+++ FLAME CUTTED PROFILE – MACHINED – READY TO BE INSTALLED +++

➡️ raw size 270 x 1300 x 2450 mm
➡️ rectangle weight approx. 9,5 t.
➡️ net weight after profiling 7,5 t.
➡️ net weight after machining 4,5 t.
➡️ 25CrMo4 +QT
➡️ 3.2 DNV

+++ FINISH MACHINED OPEN DIE FORGINGS – READY TO BE INSTALLED +++

➡️ more and more customers are asking to deliver the full ratio of our value chain:
➡️ raw forged -> pre-machined -> finish machined
➡️ short lead times combined with high quality level is the value – produced by von Schaewen

+++ FLAME CUT PROFILES – SHOT-BLASTERED – READY FOR DISPATCH +++

➡️ S355J2+N
➡️ shot-blasted
➡️ raw size 240 x 1196 x 1200 mm
➡️ net weight 1697 kg per piece

+++ NEW SALES REPRESENTATIVE IN UK & IRELAND +++

➡️ we are proud to inform that we have started a cooperation with Mr. David Evans on 1st of April.
➡️ David has got a lot of experience in the UK market and will help us to develop our business in this area.
➡️ He will get into contact to all our customers within the next days and will try to figure out new potentials for these and for new customers as well.

+++ OPEN DIE FORGING FINISH MACHINED – READY TO BE INSTALLED +++

➡️ produced by von Schaewen
➡️ 42CrMo4 + QT
➡️ US tested acc. to EN 10228-3, class 3
➡️ MTC 3.1
➡️ length 5.800 mm
➡️ max. dia 490 mm
➡️ delivery weight 4200 kg

+++ FLAME CUT PROFILES READY FOR DISPATCH +++

➡️ S355J0+AR and S355J2+N
➡️ material ready to load the truck this afternoon in order
➡️ to arrive on Monday at customers site

+++ OPEN DIE FORGED SHAFT FOR AUSTRALIAN VESSEL +++

➡️ 34CrNiMo6 +QT
➡️ raw size dia 1300 x max length 2710 mm
➡️ ingot weight 32 t. per piece
➡️ pre machined to customers drawing
➡️ delivery weight 12 t.
➡️ MTC 3.1 LRS

+++ OPEN DIE FORGED SEGMENTS FOR AN EXCAVATOR BEARING +++

➡️ 42CrMo4 +QT
➡️ raw size 250 x 790 x 5400 m
➡️ ingot weight 12 t. per piece
➡️ pre machined to customers drawing
➡️ delivery weight 5 t.

✨ A very Merry Christmas to all of you! ✨

+++ WELDED FRAME CONSTRUCTION FOR A PUNCH PRESS +++

➡ S235JR+N
➡ Size of construction
➡ 870 x 1700 x 2400 mm
➡ Weight approx. 3 t.

+++ KEEP IN MIND THAT WE CAN PRODUCE WELDING CONSTRUCTION UP TO 80.000 KG +++

+++ FLAME CUT PROFILE OUT OF FORGED PLATE FINISH MACHINED +++

➡ S355J2G3
➡ US tested acc. to EN 10228-3, 100%, class 3
➡ Sizes after machining
➡ 660 x 1900 x 2200 mm
➡ Weight approx. 10 t.

+++ FLAME CUT PROFILE OUT OF 120 MM PLATE +++

➡ S355J2+N
➡ US tested acc. to EN 10160 S2/E2
➡ MTC 3.1
➡ sizes: 120 x 2690 x 3030 mm
➡ Delivery weight: 3290 kg

+++ MACHINED OPEN DIE FORGINGS +++

➡ open die forged shafts – 34CrNiMo6 +QT
➡ US tested acc. to EN 10228-3, 100%, class 3
➡ MTC 3.1
➡ sizes: 890 rd x 2360 mm

+++ LORD OF THE RINGS +++

➡ open die forged rings - S355J2G3
➡ US tested acc. to EN 10228-3, 100%, class 2
➡ MTC 3.1

Raw sizes:
➡ OD: 1900 mm - ID: 1200 mm
➡ Thickness: 560 mm
➡ Weight: approx. 8100 kg

+++ ROUND BARS WITH ADDITIONAL SERVICE OF FINISH MACHINING +++

➡️ 1060 rd x 1395 mm and 825 rd x 220 mm
➡️ S355J2G3
➡️ US tested acc. to EN 10228-3, 100%, class 4
➡️ 3.2 DNV
➡️ finish machined acc. to customers drawing

+++ OPEN DIE FORGINGS ARE OUR PASSION – PART 2 +++

➡️ Steel can be formed like plasticine.
➡️ This is the reason why we can forge every kind of form
➡️ Tubes, round bars, stepped shafts etc.

+++ OPEN DIE FORGINGS ARE OUR PASSION +++

➡️ Tube forged with allowance to finish sizes
➡️ S355J2G3
➡️ Outer diameter 2060 mm
➡️ Inner diameter 1540 mm
➡️ Length 2450 mm
➡️ Weight 28.500 kg
➡️ US tested acc. to EN 10228-3, class 2
➡️ 3.1

+++ HOLIDAY SEASON STARTED BUT STILL LOTS OF THING TO DO +++

Last week the holiday season in North Rhine-Westphalia started already.
But we have still a lot of work to do and parts have to be shipped to our customers on time.

Wishing you all a nice holiday season. ☀

+++ ROUND BARS +++

We have more than 10.000 t. of hot rolled and forge round bars in our stocks.

➡ S355J2G3, C45N, 42CrMo4+QT, 34CrNiMo6+QT, 18CrNiMo7-6+FP
➡ dia 160 mm up to 1250 mm rd.
➡ sawn to length are finished machined acc. to customers drawing

Please send your inquiries to [email protected]

+++ ONE PART MADE OUT OF THREE PARTS +++

➡ Look what happens if you weld two plates of thickness 300 mm together with one plate 210 mm
➡ Max. sizes: 300 x 2400 x 8050 mm
➡ Weight after flame cutting and welding: 27.200 kg
➡ S355J2+N

Now we will start with the machining of this giant. Keeping you updated!

+++ FLAME CUT PROFILE, MACHINED, READY TO BE INSTALLED – PART II +++

➡ size: 150 x 2910 x 8762 mm
➡ weight after finish machining 16.650 kg
➡ S355J2+N
➡ US tested acc. to EN 10160 S2/E2
➡ 3.2 DNV approval

+++ FLAME CUT PROFILE, MACHINED, READY TO BE INSTALLED +++

➡ size: 130 x 1910 x 1910 mm
➡ weight after finish machining 2.712 kg
➡ S355J2+N
➡ US tested acc. to EN 10160 S3/E3
➡ 3.2 LR approval

We wish you a happy Easter! 🐇🐇🐇

+++ OPEN DIE FORGING FOR SHIPBUILDING INDUSTRY +++

➡ size: biggest diameter 1340 mm – total length 4450 mm
➡ weight of ingot 28.000 kg
➡ weight of forging piece 20.900 kg
➡ weight after finish machining 15.750 kg
➡ 34CrNiMo6 +QT
➡ US tested acc. to EN 10228-3, 1005, class 3
➡ 3.2 BV maritime application

+++ HOT, HOT, HOT +++

➡ Heat treatment of open die forgings is mandatory in order to create the correct structure of the steel and as a result the correct mechanical properties as well.
➡ Here you can see one pre-turned shaft with a weight of 21 t. and a max. dia of 1250 mm rd.