LAILE Singapore

ARPSPORT Mud Flaps defends the body and suspention against the stones splashed to the tire. Using 3.0mm thickness urethane seat and aluminum blacket. Designed only for each model.

The Laile Beatrush Under Panel enhances downforce at high speed providing improved handling and stability.

Beatrush Under Panel enhances downside rectification at high speed and generates down force. It also restrain the air stream from getting caught in the engine room to inhibit the engine from over heating. When running, the condition of the lower side of the body likes put the lid by the flow of the air and heat was shut in the engine room.

＜ DOWNFORCE ＞
The air flows under the body is not constant by the influence of front bumper cover and member etc, air turbulence is generated. When under panel is installed, the flow of the air is stabilized and is made fast. The atmospheric pressure between the body and the road lowers when the flow of air quicken, and the Power (downforce) from which the body is suppressed to the high atmospheric pressure in the upper part of the body works.
2.0mm Aluminum Plate.

Two cars, ZC33S AT and ABARTH595, which ran last year's Tsukuba Super Battle will be exhibiting in TAS 2024 ! LAILE will be located at West Hall 3. Do keep a look out for them !

#2024

Beatrush Under Panel for GR YARIS enhances downside rectification at high speed and generates down force. It also restrain the air stream from getting caught in the engine room to inhibit the engine from over heating.

Front Strut Brace for Honda Civic Type R FK8/FK7

Specification :
Type2-points.
Shaftφ32mm Aluminium pipe.
Bracket Steel
Weight 1.8kg

Beatrush Strut Brace enhances the body rigidity and inhibits warping, which makes the suspension movement smooth.

Under Panel for the Evo 8,9 & Wagon.

【 Specification 】
UNDER PANELt=2.0mm Aluminum
BracketAluminum
Weight6.0 kg

『GXPA16 GRヤリス　インテークキット』 お疲れさまです。本日３月３１日、年度末ですね。明日から新しい年度の始まりで、新しい生活が始まる方も沢山いらっしゃると思いますが気負わずに頑張って行きましょう～…

MITSUBISHI　LANCER Evolution X　[ CZ4A ]

In comparison with normal style oil catch tanks; blown by gas can be pulled out from this model’s oil filler cap. Operational loss of the pistons and pressure inside the crankcase are decreased due to discharges of the blown by gases.

【 Specification 】
MaterialAluminum
Tank Capacity 0.8 L
FILLER CAP Aluminum cutting, aluminum finished.

INTAKE KIT FOR TOYOTA GR YARIS (GXPA16.

Power: +6.49 kW (8.83 ps)
Torque: +3.14 N⋅m (0.32 kgf/m)
*Power check data is an in-house test value.

TOYOTA GR YARIS (GXPA16) PARTS AVAILABLE!!

New design Underpanel with air duct guide.

Mitsubishi Evo IX.
Aluminum underpanel enhances downside rectification at high speed and generates down force. It also restrain the air stream from getting caught in the engine room to inhibit the engine from over heating.

Honda Civic Type R FK8.

Front performance bar increase the rigidity of the front member and increase the body suspension performance.

Suzuki Swift Sport ZC33S.

Beatrush Under Panel enhances downside rectification at high speed and generates down force. It also restrain the air stream from getting caught in the engine room to inhibit the engine from over heating.

GR Yaris with goodies from LAILE.

Floor bar joins the bottom of the left and right B-pillars (seat belt fixing bolts) and the center of the floor horizontally with a 32mm aluminum shaft to increase body rigidity.

Engine Roll Stopper uses urethane rather than rubber material, it help suppresses the movement of the engine roll (vertical), improves the accelerator response and enhances the traction performance.

Foot Pedal Set for the Suzuki Swift Sport ZC33S.

- LIGHT BLUE
- BLACK
- GOLD
- RED
- SILVER

Processing of the aluminum brace is controlled through the use of alumite finish.

Specification :
Pedals t=3.0mm Aluminum
Steel

Rear Strut Brace For 86/BRZ ZN6/ZC6

Specification :
Type 2-points support
Shaft Aluminum oval pipe
Bracket Steel
Weight 1.9 kg

Rear Strut Brace Titanium for Honda Civic Type R FK8

Specification :

Type2-points.
Shaftφ32mm Titanium pipe.
BracketTitanium plate.
Bolt and NutTitanium.
Weight0.8 kg.

Even the most powerful car can not perform well at a high level without sufficient body rigidity. The Beatrush Strut Brace enhances the body rigidity and inhibits warping, which makes the suspension movement smooth.

SUZUKI SWIFT SPORT ZC33S
Underpanel Type 2

The Type-2 was designed to be mounted at almost the same height as the genuine undercover, so that it allows it to drop water and oil temperature even in AT cars.

Floor Performance Bar GR YARIS GXPA16.

Specification

Shaftφ32mm Aluminum pipe with a gold paint finish.
BracketSteel

Beatrush floor performance bar joints the left and right B pillar lower part (seat belt fixing bolt) and floor center part in horizontal by 32 mm aluminum shaft to enhance the body rigidity.

Rear Pillar Bar for Suzuki Swift Sport ZC33S.

Specification :
Shaft φ32mm Aluminum pipe with a polished finish.
Bracket Steel.
Weight 1.4 kg

Increases the body rigidity of the rear hatch opening. In addition, for the protection of the rear seat passenger, the shaft is designed to avoid backwards.

FRONT STRUT BRACE [ Type-1 ]
For GR 86 [ZN8]

【 Specification 】
Type2-points support.
ShaftAluminum oval pipe.
BracketSteel.
Weight1.7 kg

Blog >>
https://ameblo.jp/laile1971/entry-12792947509.html

Check out Attack Tsukuba Rail Swift official video. >> https://www.youtube.com/watch?v=kT3S36vgZ-s&t=1s

Front Strut Brace for Honda Civic Type R FK8/FK7

Specification :
Type2-points.
Shaftφ32mm Titanium pipe.
Bolt & Nut Titanium
Weight 1.2kg

INTAKE KIT FOR TOYOTA GR YARIS (GXPA16) OUT NOW!!

Power: +6.49 kW (8.83 ps)
Torque: +3.14 N 32m (0.32 kgf/m)

Front Frame top Bar for Suzuki Swift Sport ZC33S.

Specification :
Shaft Aluminum-oval pipe with a gold paint finish.
Bracket Steel.
Weight 1.1Kg.

Platform as the foundation of body composition. Among them, the main frame(which is the basis of the chassis) is only the two rear ends of the two frames are connected by bumper hosesment and thin iron plate. Therefore, the torsional rigidity of the car body is weak, and when a load is applied to one wheel as in the case of entering a corner, the car body twists and the tires and suspension do not function sufficiently.

Bolt On Front Frame Top Bar:
TOYOTA　GR 86　[ ZN8 ]
TOYOTA 86 [ ZN6 ]
SUBARU BRZ [ ZD8 ]
SUBARU BRZ [ ZC6 ]

【 Specification 】
Shaftφ32mm Aluminum oval pipe with a gold paint finish.
Bracket : Steel
Weight : 4.6 kg

Front Performance Bar For :
TOYOTA　GR YARIS　[ GXPA16 ]

【 Specification 】
Shaft : Aluminum oval pipe with a gold paint finish
Bracket : Steel

Rear Performance Bar For :
TOYOTA　GR 86　[ ZN8 ]
TOYOTA 86 [ ZN6 ]
SUBARU BRZ [ ZD8 ]
SUBARU BRZ [ ZC6 ]

【 Specification 】

Shaftφ32mm Aluminum pipe with a gold paint finish.
Bracket : Steel
Weight : 1.3 kg

Titanium Rear Strut Brace for :
TOYOTA　GR 86　[ ZN8 ]
SUBARU　BRZ　[ ZD8 ]
SUBARU　WRX STi　[ VAB ]
SUBARU　WRX S4　[ VAG ]
SUBARU　 LEVORG 2.0 Turbo　[ VMG ]

【 Specification 】
Type2-points.
Shaft Titanium oval pipe.
Bracket Titanium plate.
Bolt and Nut Titanium.
Weight : 1.1 kg.