Pennsylvania Gunsmith School
Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Pennsylvania Gunsmith School, Trade school, 812 Ohio River Boulevard, Avalon, PA.
An intense amount of quality work came out of this amazing group! They're sure to make an impact on the industry!!
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
A glimpse into "the day in a life of" a Pennsylvania Gunsmith School Student!
PGS An inside look at the 16-month, hands-on Master Gunsmithing Program® at Pennsylvania Gunsmith School® along with comments from several graduates employed in ...
Posted • I’ve been incredibly busy the past few months. Constantly at work on the machines and learning new skills. These are my projects I’ve made. I’m super proud of them and somewhat in disbelief that I made these myself.
#1911
Barrel Fitting and Chambering Lecture today! I know these guys are anxious to get started and put their knowledge to the test!
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
Another fine group of Gunsmiths to congratulate into the industry!
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
The first complete rifle build I completed in 4th semester at PGS. Built on an AERO SOLUS short action and a Brux barrel chambered in 6.5 Creedmoor. MDT ESS chassis and GRND bipod with a Primary Arms GLx 4.5-27x56 scope and a Timney HIT trigger. Griffin Armament paladin break with the Dual-Lock supressor mount system so that when I get a can, it can be quick change between the other builds I have planned.
Reposted from
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
Modernized the AK course by build!
Parts List:
Polish Parts kit
Fixed Alpha Ak Stock
AKM Receiver
Gen 3 Dog Leg Dust Cover and Gen 3 Handguard
MOE Pistol Grip
HHS II
1913 Stock Adapter
Reposted from
Hawaiian Shirt Day! These students and instructors showed up!
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
In honor of 75 years, the students and alumni and everyone that has been apart of the school in any way should be very proud of where we are today! This video is a piece of a special opportunity we had with a film crew that put together a look at what we do.
A day in the life of a Pennsylvania Gunsmith School student Talk about a highlight reel! Look what our students are putting out. Check out our PGS students on the bench, at the machinery, in the applications lab and...
Today I learned how to jewel a bolt. This was so satisfying and therapeutic to do, I cannot wait to do this again.
Reposted from
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
Today is the beginning of the PGS 75th Anniversary weekend. Which means fun, food, and showing off! Here is my lineup of projects that I’m proud to present from my time here so far.
Reposted from
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
celebrating our 75 year anniversary! Lots of giveaways and vendors!
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
Every now and then a student comes through with an advanced set of skills and really shows off! We've had many over the years but here's one of the most current projects from Christian!
R&D!
I needed a Cratex rod holder for jeweling bolts and general polishing. The Dremel kits that I initially bought didn't work well when jeweling due the tapered rods that would slowly increase the size of the "jewel". I was searching online and after not finding one I liked, I designed and made my own! This design allows for a solid rod of Cratex to be used while also maintaining low run out for consistent results. The set screw was added to push out the rod when it wears and makes for less wasted Cratex!
Reposted from
Thank you for RSVP'ing. Hope to see you all there!
Thank you!
Big shoutout to Austin of for sending a sample batch of his lowers for my fellow students to build projects with. Thanks for supporting the dream, Semper Fi!
Reposted from .blasters
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School. For more information on start dates visit https://pagunsmith.edu/admissions/
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
Great job Dana taking this Re*****on from rose gold spray paint to a worthy Cerakote professional finish!
"One part of why I am loving is how in a short amount of time, I have learned how transform a firearm so ugly it’s painful to see (in my opinion), into something desirable. It’s also rewarding to do this for a friend who will appreciate it . I’m looking forward to many more skills I will be learning from my instructors in the near future. 😁
Reposted from "
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
It’s a dirty job, but someone has to do it! Nick just fit his buttpad to his stock using a belt sander to shape it, resulting in a seamless construction.
Reposted from
Way to go Pickle Rick!
Made a new screw and retapped the hole for a 9/16-18 screw for the belt sander
Reposted from
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
I graduated from Gunsmithing School 2 weeks ago. I had an amazing experience and learned a lot from some amazing instructors.
Reposted from
CONGRATULATIONS GUYS!
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
Today I learned how to repair the rib on my old SxS by doing some soldering before I refinish it. This was a really awesome thing to learn.
Reposted from
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School. For more information on start dates visit https://pagunsmith.edu/admissions/
It was such a cool and enjoyable experience learning how to take a block of wood and turn it into a rifle stock! I've barely done any woodwork in my life, and I have learned so much about it. Woodworking is something Im enjoying a lot more than I thought!
*****on
Reposted from
Gunsmithing is a hands on craft... Hands on Gunsmith Education just makes sense... visit pagunsmith.edu to get more information on a school that prepares you for a career in the every growing fi****ms industry!
Director of Instruction is available to schedule a live ZOOM tour of the Gunsmith School.
Here at the Pennsylvania Gunsmith School we become masters at many aspects of gunsmithing. We cannot forget where our modern fi****ms come from though. This beautiful flintlock was built by students in their spare time during their stock making semester. From the metal work, woodwork, engraving and final finish this shows the skills learned while attending PGS.
Reposted from
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Contact the school
Website
Address
812 Ohio River Boulevard
Avalon, PA
15202
Opening Hours
Monday | 8am - 4:30pm |
Tuesday | 8am - 4:30pm |
Wednesday | 8am - 4:30pm |
Thursday | 8am - 4:30pm |
Friday | 8am - 4:30pm |
Avalon
The Pittsburgh Ski Club was founded as a non-profit organization to encourage skiing through instruc
Avalon, 15282
The official page for the Duquesne University Office of Freshman Development