AWD Motorsports

Mitsubishi OEM DiaQueen fluid in stock a and ready to ship

Both 75w-85 and sae 90 in stock and ready to ship

Order here

www.awdmotorsports.com

AWD Motorsports is a dealer for HPT Turbochargers. If anyone is looking to see what 1 of these are capable of we can get you set up with 1.

68mm will be available in a few weeks as well.

Message or email us to get yours today!!

Email: [email protected]

In stock and ready to ship. Message us to get your set.

Torque Solution Adjustable Rear Control Arms (Spherical): Mitsubishi Evolution 7/8/9 Torque Solution Adjustable Rear Control Arms (Spherical): Mitsubishi Evolution 7/8/9

In stock and ready to ship!!!!

Torque Solution Adjustable Rear Control Arms: Mitsubishi Evolution 7/8/9

- Made out of 7075 Billet Aluminum
- Weighs 3lbs 4oz Per Arm (3.25 lbs) (6.5lbs Per Set)
- Black anodized / Torque Solution Laser engraved
- 85A Durometer Urethane Bushings
- Nickel Plated 4130 Chromoly Adjuster
- High Quality Teflon Lined Spherical Bearing FK Rod Ends
- Stainless Steel Hardware
- Sold As A Pair
- Limited Lifetime Warranty- 7075 Billet Aluminum
- FK Teflon Lined Rod Ends
- Chromoly Adjusters

Get your set from us here:

http://www.awdmotorsports.com/product_p/ts-ev-650.htm

This petition forces a panel of Federal Judges to
decide if it is legal to convert a street car into a
racecar.

The fight to end the ambiguity and uncertainty
surrounding enforcement is here. The EPA boldly and
unequivocally states there will be no exceptions for
racing, period.

https://www.gofundme.com/f/protect-your-right-to-convert-cars-into-racecars

We have x2 sets of Mitsubishi Evolution 7 8 9 Transfer Case Hardened Ring and Pinion IN STOCK and READY TO SHIP!!!

These are the only 2 left before stock runs out. Next batch will be months out.

This aftermarket Ring and Pinion is made from the highest quality steel hardened to Rockwell 60 for the utmost in durability and longevity.

It can be utilized when replacing worn OEM parts or as an upgrade to support 800+whp as tested on several US EVO's.

https://www.awdmotorsports.com/SearchResults.asp?Search=hardened+ring+and+pinion&x=39&y=9

New Product 🚨🚨
In Stock and Ready To Ship

Torque Solution Billet Rear Lower Engine Mount
Applications: Hyundai Veloster N 2019+ / Elantra GT 2017+ (I30N)

https://www.torquesolution.com/product-p/ts-hv-649.htm

Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability for street and race applications.

Torque Solution Billet Rear Engine Mount will provide improved traction and reduced wheel hop without too much vibration. Also stops the typical transverse mounted engine (FWD) pitching under hard acceleration and on/off throttle situations which in return allows you to put the power to the ground!!!!

- Billet Aluminum
- 75A durometer bushings
- Grade 10.9 Zinc Hardware
- Reduces Wheel Hop / Traction Loss
- Improved 60fts / e.t's
- Limited Lifetime Warranty

Hardware Included:
- M10-1.5 x 25 Zinc Hex Bolt (2)
- M10 Zinc Flat Washer (2)
- M14-2.0 x 80 Zinc Hex Bolt (1)
- M14 Zinc Flat Washer (1)
- M14-2.0 Stainless Steel Nyloc Nut (1)

New Product 🚨🚨
In Stock and Ready To Ship

Torque Solution Pro Billet Spark Plug Gap Tool
Applications: Universal for 10mm, 12mm, 14mm and 16mm threaded Spark Plugs

Gap Tool Only - TS-TL-GAP
https://www.torquesolution.com/product-p/ts-tl-gap.htm

Gap Tool w/ Feeler Gauge - TS-TL-GAP-FG
https://www.torquesolution.com/product-p/ts-tl-gap-fg.htm

Torque Solution Pro Billet Spark Plug Gap Tool will give you that perfect gap every time. Our tool is 100% CNC Billet Aluminum design from the body to the k**b. The tool features a large knurled k**b for a sure grip, comfort and precise adjustment. No more finding something to bang the spark plug on and having to test it over and over till you got it just right. Do it once with precision using our gap tool.

Easy to use steps:
1. Open the adjuster to allow proper clearance for your spark plug.
2. Set your spark plug into our gap tool making sure the electrode to ground strap opening is facing up.
3. Screw the adjuster down till it makes contact with the spark plug ground strap.
4. Using your desired size feeler gauge screw the adjuster in to compress the ground strap till you reach your desired gap. Do not compress onto the feeler gauge. Use the feeler gauge to test the gap as you screw in the adjuster.
5. Loosen the adjuster and confirm the desired gap has been achieved. May need to repeat step 4.
6. Once desired gap is achieved simply remove the spark plug.

- 6061 Billet Aluminum
- Black Anodized W/ Torque Solution logo
- Fits Most Spark Plugs
- Limited Lifetime Warranty

**Not compatible with 18mm thread and longer style spark plugs.

New Product 🚨🚨
IN STOCK READY TO SHIP!!!

Product Description:
Torque Solution Billet Aluminum Transmission Mount
Applications: Toyota GR Supra MKV / BMW Z4 G29

http://www.torquesolution.com/product-p/ts-gr-640.htm

All Torque Solution mounts are made of high grade billet aluminum material, urethane bushings, and stainless steel hardware. This is a direct replacement of the OEM transmission mounts. You can rest assured that with our superior material and design you will get optimal performance for years and decades to come. The mount features 75 durometer bushings which keep vibrations down to a minimum while keeping your trans in place under hard acceleration, cornering, and braking. Whether you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.

- Helps Eliminate Wheel Hop / Traction Loss
- Improved 60fts / e.t's
- CNC 6061-T6 Billet Aluminum
- Black anodized w/ Torque Solution Logo
- 75A durometer bushings
- Limited Lifetime Warranty

New Product 🚨🚨

IN STOCK READY TO SHIP!!!

Torque Solution Map Sensor Adapter
Applications: Nissan GT-R R35

Torque Solution Map Sensor Adapter allows you to easily switch the OEM sensor for a 1/8" NPT male threaded map sensor, such as AEM 3.5 Bar Part # 30-2130-50, AEM 5 Bar Part # 30-2130-75 or larger.

- 6061 Billet Aluminum
- Black Anodized
- 1/8" NPT Female thread
- FKM Rubber O-Ring
- Limited Lifetime Warranty

**Tune required to run non OEM map sensor.

New Product 🚨🚨
In Stock and Ready To Ship

https://www.torquesolution.com/product-p/ts-ex-633.htm

Torque Solution Boost Pill
Applications: Mitsubishi EVO X / Ralliart 2008-2015

Torque Solution Boost Pill for Mitsubishi EVO X / Ralliart 2008-2015 has been designed to stabilize the boost in vehicles equipped with SST transmissions. Due to the clutch engagement in the SST transmission, the operation of the boost control can be at times, inconsistent which amounts to unwanted boost spikes and erratic boost control. Some of this has to do with the ECU to solenoid limiting you from hitting target boost. Our boost pill helps solve this issue with a simple, yet affordable fix.

- CNC Brass
- Direct Replacement for OEM Boost Pill
- Helps Control Boost Spikes and Control Issues
- Limited Lifetime Warranty

**Tune adjustment is required.

New Product 🚨🚨

In Stock Ready To Ship!!!

Torque Solution Tial BOV Adapter Kit
Application: Infiniti Q50 2016+ / Q60 2017+ 3.0T VR30DDTT

Torque Solution Tial BOV Adapter Kit for Infiniti Q50 2016 +/ Q60 2017+ 3.0T VR30DDTT allows you to direct fit your blow off valve to your car without any welding or modifications at all. This kit is a perfect option to help reduce compressor surge, alleviate wear and stress to your turbos, hold steady boost pressure and get that unique BOV sound. Designed to work with Tial Q 50mm BOV's. 2 are required to complete the install.

- CNC 6061-T6 Billet Aluminum
- Black 4 Ply Silicone Hoses w/ Torque Solution Logo's
- Easy Install
- Direct Fitment
- Limited Lifetime Warranty

Includes:
- Billet Aluminum Fl**ge for TIAL BOV (2)
- Silicone Blow Off Valve Adapter Hose (2)
- Silicone Throttle Body Coupler (2)
- Silicone Vacuum Hose (4ft)
- Silicone Safe Worm Gear Clamp 32-50mm (2)
- Zip Ties (4)

Fits:
- Infiniti Q50 Sedan 3.0T 2016+
- Infiniti Q60 Coupe 3.0T 2017+

**Tial Q 50mm BOV's not included.

http://www.torquesolution.com/product-p/ts-iq-tial.htm