Ditco, Inc.

Happy Holidays!!! From all of us at Ditco, wishing you a Merry Christmas and Happy New Year!

The AS401 is the newest spreader controller from Ditco, Inc. An upgraded version of the popular AS3, this controller offers a built-in adjustable liquid output for pre-wet systems. A 2x16 OLED display makes set-up and operation simple. The added USB port allows for data-logging and easy updating. Best of all, it uses the same 9-pin plug as our other spreader controllers; no re-wiring needed to upgrade!

Thank you Paul Barnes!!
After 25 wonderful years of working at Ditco, Paul is finally retiring. Paul has been an important part of the Ditco team and will definitely be missed. We wish him the best on all his next adventures!

The team at Ditco hopes everyone has a Happy Holiday Season!

Check out www.ditco.net for November's Featured Product!

Homepage | Total Visits 29538 | Ditco

Same AS3 with a New Look and Bigger Displays!

The AS301A1B has all the same functionality as the previous model with a few visual modifications.
Larger Red Displays are easier to see and read! These displays replace the smaller yellow and green of the previous model.
New k**b colors, Green means Go! Red means STOP! We now use Green for Blast (100% conveyor output) and Red for Pass (conveyor and spinner turn off).

Contact us for more information: [email protected] or 253-854-1002
See http://www.ditco.net/snow-ice/ for more Snow and Ice Management solutions

ST100 & IR102 - Infared Temperature Sensor and Display

The ST100 is part of a thermal measurement system used for displaying surface and ambient temperatures. It pairs with the IR102, a rugged infrared sensor that can be easily mounted and is capable of enduring harsh weather conditions.The ST100 is mounted in the cab of the vehicle and receives the temperature signal from the IR102, which mounts to the exterior of the vehicle. This simple set-up can be used in a wide range of thermal measurement applications.

See http://www.ditco.net/snow-ice/ for this and other Snow and Ice Management solutions

The 24P01 & 24P02 - Single Valve Controllers
These units provide a full-featured control for operating single acting proportional valve coils. The valve driver develops an adjustable pulse-width modulation output in direct response to the front panel k**b position. The compact design is easy to install and set up for immediate operation. The 24P02 offers remote installation possibilities with included wiring.
There are a wide range of applications for which the variable output of the 24P01 can provide a direct drive for hydraulic
flow control: product pumps, material conveyors, feed and delivery augers, alternators, propulsion drives, lifts and many
others.
See http://www.ditco.com/electro-hydraulics/ for this and other electro-hydraulic control options

The AS301 - Automatic Spreader Control.
This small pattern design fits into consoles, overhead clusters, arm wrests, dash panels and easily accommodates today’s smaller cab requirements. The AS301 offers both manual and automatic control modes, with true pounds per mile regulation based on vehicle ground speed. The AS301 provides current controlled PWM electronic valve drive for a conveyor (auger), a spinner, and a pre-wet liquid enable. The AS301 can operate with today’s popular electro-proportional mobile valves.

See http://www.ditco.net/snow-ice/ for more Snow and Ice solutions.

Coming soon: AS400 - New Spreader Control in development with a brand-new display, communications, and more advanced features!

Ditco, Inc. updated their info in the about section.

Ditco, Inc.
Located in Kent, WA, near downtown
Engineering and Manufacturing of Industrial Controls

Ditco, Inc. updated their website address.

Seahawks Edition


Featuring: SV100 Automatic Monitor
Four outputs: PWM sourcing valve drivers,
Inputs include: RPM, temperature, 2 digital, 2 analong
RS232 and CAN