Case Craft

This purple beauty is set up with a locking pullout desk, twin monitor arms, a Sentry Safe, and tons of storage!

What do you think of that?!?!?

This was a fun one! Our friends at Fuse Technical Group needed a mobile solution for a Ross Video TD3. The console needs to lift out of a case and drop into an existing workstation. Since the TD3 is not designed to travel, we started by designing a new side mount bracket that could support more of the console and build that into a Skatelite worktop. Aluminum handle and an aluminum subframe made it a breeze to lift this massive console out of its case and set it safely into the workstation.

Live VariPod®️ demos are happening daily! Email us at [email protected] or call us at 702-685-0279 to schedule you demo.

What do you think of our 26U double wide tour rack? Locking pocket doors on the front and locking full flip around doors on the back. Our proprietary rack cage allows you to index your rack rail rails in 2" increments or add a mid rail for cable management. The open design allows for a massive amount of natural air flow.

Email us at [email protected] for more information!

Check out this new workstation for another member of the talented crew at Fuse Technical Group! This thing is loaded with extra long drawers, a pullout desk, a flip up table, CCT LED lights, and a little trap door for cable management.

The indestructible Skatelite work top is the cherry on top of this well appointed workstation.

We are so excited about this one! Introducing the Case Craft ATA Hospitality D, the flagship in our hospitality case line. The third/half pack case measures an impressive 72” in height. Features include:
• Eight large door cubbies
• Flush fit under cabinet LED light
• Coffee pullout custom fit to your maker
• Plenty of drawer and cabinet storage
• GCP2 power in with plenty of distribution

We offer a nice optional appliance package that includes a 1.1 cu/ft microwave and a 3.3 cu/ft fridge. Nespresso and Keurig coffee makers are also available.

The ATA Hospitality D starts at $6,350. Give your clients and crew a 5 star experience backstage! Reach out to us at [email protected] for more info!

We are excited to announce that phase 1 of our new website is live! More to come but stop by and let us know what you think!

www.casecraft.com

Case Craft | Custom Storage and Workstation Solutions Case Craft, based in Las Vegas, Nevada, is setting a new standard for storage and workstations that carry what you need, how you need it—wherever you go.

As we close out 2023, another fantastic year at Case Craft, we always love to look back at some of our favorite projects. The projects pictured here are only a small sampling of exciting, user focused solutions that our amazing team has provided to our clients.

I want to thank all of our clients, individuals and companies, for trusting us with your projects. I know that investing in workflow, while considering form, function, and cost can be daunting. We are grateful that you all have chosen us with your hard earned money. We look forward to a long relationship with you all.

I also want to thank my staff. Not one bit of what we accomplished this year would be possible without you all. From our shop assistants to the leadership team, each one of you has rallied to continue to provide our clients with products that I am proud to put the Case Craft name on. As we continue to grow our team and expand our operation, I am grateful for this team and their commitment to providing the absolute best product to our clients and bring our new team members up to speed with the same goals.

Eleven years into this journey called Case Craft, I am proud of where we are. I am thankful for who we get to work with. And I am excited for a new year of possibilities.

Happy New Year to you all. I look forward to hearing from you all in the new year.

-Brian

Check out this larger than life work case. features include a left door flip up work table, combo lock drawers, steel wall control panels, CCT-dimmable LED lights, and huge 28” long drawers!! This one is not for the faint of heart (or tight in truck space)

Check out our HC4 in black! This beauty shipped with black high pressure laminate drawer faces, black Ecomat trim and worktop, and an RGBW LED task light.

Everybody loves a case with a little color. Check out this purple clamshell HC5 variant, with a neat little safe!

A sweet rigging workstation headed to our friends at The Kennedy Center. Wire rope spool rack, steel wall control panel for swagers, an indestructible Ecomat work top, and a nice little LED task bar.

Just in case you haven't seen it, say hello to our popular HC4D workstation! Designed in a convenient 1/2-1/3 pack case shell, the HC4D gives you tons on storage in the doors, a nice array of drawers, a pullout desk, and a flip top lid with locking stays.

For more information and pricing reach out to us at [email protected]

We have a pair of these custom advance carp cases heading out to our friends at The Lion King - Musical for the North American tour. Custom drill motor/ screw gun storage, removable lower dividers, a large vertical drawer, and plenty of storage.

Thank you for a fun design, LKR Crew!

Check out this beauty! A full size case with tons of drawers and fold-flat storage doors. This thing is set up for full stage production!

32 Panasonic projector cases, 19 Barco projector cases, 5 Clay P**y Mini cases, and 2 HC4D workstations rolling out the door in a very pleasing wave!

This fancy navy blue workstation might be small, but it has a lot going on.
- locking pullout desk with dual pencil drawers
- secure padded monitor storage in both doors
- fully adjustable and removable monitor arms
- Sentey Safe
- telescoping table legs in the top lid

We just shipped out a pair of tricked out little workstations with features that include:
-power monitor lift
-power block with an HDMI pass thru on the top surface
-power block with an HDMI pass thru on the back of the pullout desk
-telescoping table legs in the lid
-nifty new combo drawer locks
-steel wall control on the left door
-movable shelves and power on the right door

That was a lot.

Sticking with the walnut theme from last week, another walnut beauty heading out to our friends at Killswitch Inc. . This Broadway style case is protected with our optional armor kit, has a walnut pullout desk with integrated power, and a spot for a printer.

What can we say about this case that the pictures don’t show?!?! This tricked out workstation with solid black walnut drawer faces, pullout desk, and trim is a show show stopper (we hope it doesn’t actually stop a show). TRUE1 and etherCON inputs, monitor control arms, 10U shock mounted rack, on and on. We are in love with this workstation.

Our stock FC Hospitality Case is always a big hit with crew and clients alike. Round out your production with easy access to coffee and snacks. Everyone will thank you!

This blue beauty is heading out to our friends at Benson Technical Services. Here’s another for your collection, Mike! We all hope it is a welcome addition.

The TC Hair Station is the smaller cousin to the FC we posted a few weeks ago. When stage space is a premium, this smaller case still gives plenty of light from the CCT dimmable LED, a large acrylic shatter proof mirror, and nice storage. This version still includes the pullout work surface with 5 indexed stops.

We are hiring! Case Craft is looking for a drafter to join our team. This is a full time, in person, union position with competitive pay and great benefits. We use Vectorworks, SolidWorks, and VCarve in house, but AutoCAD knowledge can get you in the door. This position will work closely with both the designers and the shop team, so good communication is a must.

If you have a high attention to detail and want to help solve industry problems, email us at [email protected] or DM here.

That is a tidy FC Hospitality case, heading straight to our friends at Fuse Technical Group. Keep the clients and crew coming back with a well stocked, organized hospitality set up.

Check out this nifty conversion of our popular Crawford Office case! A fee extra drawers, mounted monitor, 5U rack space with etherCON and XLR, power in the desk, so much happening!

How do we make a basic third/half clamshell wardrobe case something special? We line it with real Spanish cedar. Every time we walk by this beauty, we get that distinct smell coming out of the vents. The talent is going to love this one.

Our popular third pack workstation, the TC2, has been client favorite! Plenty of drawer storage, door pocket storage, and a nice little closet on the side are all complimented by nicely sized work top. Hit us up if you want to know more at [email protected]

Who needs a super trick Comm Workstation? Our friends at Fuse Technical Group did and we delivered. Featuring fully shadowed belt pack, antenna, base station, and battery drawers, along with a cozy home for headsets and stands. This is how comm should be deployed.