Hunts Mobile Welding Repair

This customer wanted a custom made car rack so he would be able to forklift cars onto the rack and prepare the cars to get scrapped. We made everything out of I-beam and tubing and put gussets on everything so it can hold the weight of all vehicles.

This is a frame for a fence that this customer wanted to protect this machine. We cut and fabricated everything on site. The customer is going to put the chain link fence to finish everything up.

Contact us for any of your mobile welding necessities ‼️(516) 557-9908‼️

This is a heavy duty attachment for a forklift that a customer wanted to attach hose reels onto. We measured, cut and fabricated everything on site. Contact us for any mobile welding and repair needs‼️(516) 557-9908

This was a late night emergency call on this machine. The piston on this claw had broke and the customer needed it repaired before the next day so we went out and got it all fixed up late night. We are on call for emergency repairs 24/7. (516) 557-9908

We are back to working on this mid engine swap Volkswagen GTI. We fabricated the front and rear subframe mounts so now everything is sitting on its own weight.

Last minute job today on this excavator with a magnet attachment on it. We had to weld a clamp style bracket that holds the hydraulic hose in place while the machine in in use.

Here are two roller housings that go on the frame of a roll off dumpster truck. We cut the old broken ones off and replaced and welded the new ones on!

This is a custom rear frame that we fabricated for a customer who is doing a mid engine swap in his volts wagon. Once we pull some measurements and get the crossmember in we will weld all of that in too.

Here’s a dumpster stop on a roll-off truck that had cracked and broke and we welded it back together same day so the customer could get his truck back in service.

This toolbox on the side of this truck was loose so i welded two supports on top of the toolbox to the ladder rack.

Trailer jack i had welded onto a dump trailer.

Here’s a trailer support post I rewelded onto this trailer.

Spring time is here! Any equipment that you take out of your shed this year that is broken or any outdoor furniture that has broken, or just anything else that you need welded, just give me a call and I’ll come and fix it up.

This customer wanted a custom exhaust and a bed stack on his Ram Diesel

Custom transmission tunnel welded in a 1965 GTO. Also the customer just wanted a hole covered up instead of welding in a whole floor pan so I used extra floor pan metal I had.

Quick exhaust repair on this truck. Customer wanted to get rid of the clamps and have the exhaust welded together.

New trailer jack I welded onto this dump trailer.

Trailer floor that was buckled up. Heating up the floor and bent it back down, then welded everything back together. Another job done for

Snow plow that had cracked and broke. Welded it back together and it wont have that problem again. Pick Up Pros

Pictures of a trailer jack that had broke off and i stick welded it back on.

A mini bike that had a cracked frame. Tig welded the frame back together and also welded on gussets to reinforce the frame.

Floor pans I welded in on a trans am.

Before and after on a excavator bucket that needed new protective plates. Torched the old ones off and welded new ones on.

Contact me for all your welding needs.