Xebec Deburring

Curved Surface Polishing with a XEBEC Brush Surface

Automate deburring and polishing in your CNC machine. XEBEC Brush Surface is ideal for deburring, cutter mark removal, and surface polishing.

Each bristle is made by fixing 500 - 1,000 ceramic fibers, each together with a binder. The tips of each of these fibers, a few dozen microns in diameter, form the cutting edges. Continuous cutting edges provide stable and consistent grinding performance.

The brushes, made of a high-density fiber structure, have high rigidity and do not become distorted with repeated use.

The high grinding power exhibited by thousands of cutting surfaces reliably removes burrs.

The self-sharpening fiber structure works to the very end without losing grinding power.

Visit the website link below for more info…

https://deburringtechnologies.com/products/xebec-brush-surface/

Deburring a tough angled hole.

Tool: XEBEC Stone Flexible Shaft Disc Type

Ideal for deburring grooves and deep holes

Main features
-The spring steel flexible shaft absorbs vibrations which makes soft contact with the surface possible while preventing the Ceramic Stone to bounce around, thereby reducing the risk of scratching the workpiece. These benefits make this an optimal tool for polishing and deburring areas that are deep inside the workpiece.
-The Ceramic Stone uses ceramic fibers that do not break away easily like abrasive grains, making it more durable than conventional stones.
-It is smooth to the touch and safe to use.

Visit the link below for more info…

https://deburringtechnologies.com/products/xebec-stone-flexible-shaft/

Robot Deburring Cylinder Head Holes with a XEBEC Brush

The XEBEC BRUSH™ CROSSHOLE demonstrates Cross Hole & Hole Deburring after drilling in a CNC machine. Ideal for deburring, polishing, and cutter mark removal of inner diameter and counterbored part.

Xebec brushes use unique abrasive ceramic fiber material instead of abrasive grains. The content ratio of ceramic fibers is an impressive 80% giving exceptional grinding power with a consistent cutting performance throughout the life of the brush. This is a real advantage compared to abrasive impregnated nylon brushes, where performance drops over time, resulting in increased process times and much higher frequency of brush replacement.

The Xebec products also maintain their shape for their full working life, unlike other deburring materials that deform quickly; this improves the consistency of finish and eases the management of them as a consumable on a mass production line.

Visit the website link below for more info…

https://deburringtechnologies.com/products/xebec-brush-crosshole/

Fast and Easy Deburring with this Tool

XEBEC Ceramic Stone™ Meister Finish

Optimal for polishing and deburring of molds and dies.

Made of unique ceramic fiber
No breaking, No cracking, No chipping�XEBEC Ceramic Stone uses the original abrasive ceramic fiber material instead of abrasive grains.

Braided structure developed by the unique technology.
Cutting edges are exposed over the entire surface; both the tip and sides has high grinding power.�Can be used with high rotational speed without splitting the tip.

Visit the link below for more info…

https://deburringtechnologies.com/products/xebec-ceramic-stone/