Kiser Custom Cabinets and Woodworking

This custom furniture piece is made of locally sourced, solid cherry with a walnut stain and ML Campbell Krystal top coat. It features raised panel doors and end panels, Salice soft close hinges, a solid wine rack, custom stemware hangers, a fully finished interior, furniture toe piece, and custom cherry crown. What I love the most about “one-off” pieces and what makes it truly special is that it's one-of-a-kind, with no other piece like it anywhere in the world!

Sneak peak of a full custom kitchen we are finishing up

Custom bathroom vanities

This kitchen, as well as the laundry, pantry and master vanity turned out great! Such awesome people to work with as well and I’m very appreciative of them! The kitchen is definitely my favorite though! All cabinetry is 3/4” maple boxes/carcasses, maple faceframes, and shaker style maple doors with full overlay soft close hinges. Drawer boxes are dovetailed poplar with 3/4” maple bottoms and synchronized soft close undermount slides rated at 150lbs and 200,000 pulls. The pullouts are “no wiggle” meaning they have a 3rd side mount slide near the top to keep them extra stable as well as 2 undermount slides at the bottom. Besides pullouts, everything is built in shop by us! Even the crown is made in shop out of poplar running through a woodmaster moulder with custom ground knives. Nothing is outsourced so we can control the quality of every detail.

Laundry room that turned out super nice and very functional as well! Roughly 6’ of hanging space with tons of storage and the glass uppers adds a nice touch. The tall broom closet also has a shelf to help hold brooms/mops vertical.

Each door was 36” wide, solid cherry with a walnut stain. Matching frame/jamb and elegant arches meeting at the top. Glass is this one was tempered Aquatex to allow light through but still provide some privacy. These were well over 300lbs!

Master vanity 10’ in length, all doors are soft close 3 cam slides and all drawers are undermount synchronized slides. Drawers are poplar with dovetail joinery and 3/4” bottoms. 3 stage crown moulding.

Gorgeous Built-In with shaker style doors, 10’ wide and 10’ tall with adjustable shelving. Doors are all soft close 3 cam hinges. This 3 stage crown could not be found anywhere… ended up ordering custom cutters to run all three stages in house so we could tie in to the existing moulding. For those that don’t know, we have the capability to make all our mouldings, including crown and base! If you have a moulding you can’t match, we can take a 3” piece and have custom knives ground to run it ourselves!

We have been covered up for months and I have not been posting like I should! Over the next few days it’s time to dump some photos of our work over the last several months. We have had the opportunity to build and work for some great people…all local to Eastern KY. I really enjoy when a client becomes a friend! Gonna start with these beautiful doors built from solid 8/4 cherry with cherry mullions and a matching frame/jamb as well. Best guess is these weighed in around 250-275lbs!

Prime, sand, paint…repeat!

Thankful for my first chance to do some live edge work. This walnut mantle and all the color variations throughout it turned out gorgeous! This thick stuff definitely takes some time to dry down but I think it’s worth the wait!!

This job has A LOT of drawers…. 37 to be exact! Solid Poplar with 3/4” dado bottoms and dovetailed sides. Nothing like a clean dovetail joint!

3/4” UV Maple Boxes, Maple Face Frames, 5 Piece Cope and Stick Maple Doors, 5/8” Dovetailes Poplar Drawers with 3/4” Maple Drawer Bottoms, Knobs/Pulls, Concealed Soft Close Hinges and Synchronized Undermount Soft Close Drawer Slides, ML Campbell Finish

A beautiful Northpoint kitchen, custom fireplaces, custom bathroom cabinet and few other jobs we have been working on and finishing up. Have a beautiful set of doors in the works now as well! 60+ hours a week are tough but I sure thank God for being able to do something I love!

A few projects we have been working on and finishing up! We strive to get as close to perfection as possible!

Start of a small make up vanity built out of kiln dried cherry. I’ll get the top glued up, drawer fronts made and mill down some maple for drawer boxes. Still haven’t made up my mind on the finish.

Beautiful custom pantry built-in we just installed… the natural maple against the ML Campbell Polar White is an awesome combination! Topped with a vinyl sealed and cleared Butcher Block, a custom maple backsplash and 4” crown running along the top. Very thankful for the opportunity this customer gave me in building this in their gorgeous home! Bemedji Epling John Williamson Brandi Kiser David Bangham

Large range hood finished up in distressed black… will look great when the crown is set! Rollout spice racks and ventless with lights

Few pictures from some past small jobs we hadn’t posted.

2-3 week turnaround!

Natural maple vanity, vinyl and cleared. Slatted drawer face, U shape dovetailed maple box (goes around plumbing), soft close and floating shelf. Ready for the top and the sink to be placed!

Front entry door built with Whipporwill Custom Cabinets and installed. Red Oak with laminate glass.

Beginning of a beautiful Oak entry door! Yes, we do custom doors as well!

Excited to announce that we are now an official dealer of Hardware Resources and Northpoint Cabinetry! We understand that custom cabinets don’t always fit a customer’s budget and have searched for months to find a quality premade cabinet we are willing to sell. True plywood boxes and hardwood frames…. No particle board or “cardboard!”They aren’t quite the quality of our custom built kitchens but are the best premade cabinets on the market! We measure first, then price the kitchen, order the cabinets; 2-3 weeks later your kitchen is installed! A few different styles and lines to choose from. Check out the link below and shoot us a message for any of your cabinetry needs!

https://www.hardwareresources.com/northpoint-cabinets

Finishing touches! Love the way the posts on the sink base turned out.… it will set proud a few inches from the rest of the base cabinets. Red Oak has some of the most beautiful grain of any wood. Stained, Vinyl Sealed and Cleared with ML Campbell products.

When you only have room for one drawer but the sink trap is in the way…. You make that space count! This drawer is designed to go around the trap but still offer storage space. Solid maple construction, full half blind dovetail joinery, and 3/4” bottom sits in a dado. Quality will last a lifetime!

Both desks are finished and I can’t wait to see the double countertops on them! Give us a
like and follow to see lots more custom woodworking in the next few weeks…