Att 2 Details - Boat Detailing

Knocked out another 28’ Axopar for Jeff Brown yachts✨✨

Got this Mako in for a detail this am, it was in need of some Attention2details! We went through everything and put the shine back on it. Then we grabbed this 24’ Regulator for a sand & paint.

Went and looked at this 23’ grady for a detail. It was in need of a makeover as it was full of mildew, oxidation along with being faded. We grabbed it and worked our magic. Removed the mildew, & compounded the topside a few times. Then we removed the grady emblem and sanded the entire hull. Now the customer has seen the pics and couldn’t be happier with its results!!

Just finished up the wash and wax on this new 37’ Axopar heading to Charleston. Then we grabbed one of our customers son’s new 26’ Regulator for a polish and wax. Putting on a maintenance plan to keep things looking there best. Finally we sanded and painted this new 23’ seahunt along with polishing and waxing it up.

Went and looked at this 37’ Axopar for a detail before being shrink wrapped and shipped up north. Now it’s protected and ready for its new home!

ON THE HUNT FOR a slip to rent, and or share. Also would consider trading 4 detailing & maintaining of your boat. I have a 20’ pontoon boat. Looking for the months of July to Oct.

Knocked out a few more this week including this 2019 25’ tidewater custom. We went through everything on the topside. The hull we had to remove the logos and do some sanding. But we got it looking new again and its now ready for the new logos to be put back on. Then we did a couple more details, a sand and paint along with a re-paint. Just keeping things moving along!!

Turned another one around😳. Grabbed this 22’ Seahunt from Bradley Creek marina for a makeover. We washed it up to remove all the mildew and rust. Then sanded out some dock rashes on the hull. We then compounded the topside a few times to bring back the shine. Our new customer couldn’t be happier with its results. Then we grabbed this 23’ Whaler that normally stays at Marine Max. Now its new home will be at Fig 8 marina. So we detailed it up and are getting ready to sand & paint it. Lastly, we detailed up this 23’ pontoon. It had water spots all over the aluminum panels. We removed those and applied product to them after doing a good detail wash, the console needed a good buffing as it was oxidized. Clean and waxed the metal and conditioned all the cushions. This makeover is complete and so is this week👊Enjoy everyone..😎👍thanks Beau for the referral!

Things have been busy detailing and bottom painting a few more from around town. We got this grady in that we did last year and it was a mess!! It’s important to get things on a maintenance plan so they don’t come back looking like this one. But it’s what we do so, you keep them dirty and will get them right again!✨✨

Good morning everyone just finished up on my 4 AM detail wash. Now it’s ready for the 6 AM crew to get it detailed up👊

Detailed up a few more today, get yours scheduled so we can get it protected✨✨

Took care of a few today, this Robalo came in a mess. But it’s leaving here looking like a champ and ready for the water. Then we grabbed this 30’ Chris Craft we maintain on a maintenance plan. Finally we knocked out this 21’ Scout as it was a little oxidized and needed a once over to get things right before polishing and waxing. Next….👊

So we got this 25’ contender in for a detail from Ocean Isle. It was in need of a good cleaning and detailing. The one side of the hull also needed to be sanded. But we worked our magic and it went home shiny✨✨. The we got this new 26’Contender in for a ceramic coating of the hull and polish and wax on the topside. But after washing things up and looking at the topside. We could see that there were a lot of imperfections and haziness. So we compounded the topside so things wouldn’t streak. Now it’s put on a maintenance plan to keep things looking there best.

Just finished up with this 21’ Carolina skiff. It was faded and needed some love. We removed the tribal decal and pinstripping. Then we went to work on turning this one into a new boat again. We compounded the topside two to three times to bring back the shine. The customer couldn’t have been any happier with its results👊

Busy busy on another rainy day, just finished up on this 27’Albury Brothers. We grabbed this 24’ keywest from WB to detail and sand out the fading on the hull. Made it back this am before it came down🌧️. Then we finished up on this pathfinder that needed a once over with compound. Grabbed a few of our maintenance customers from Sloop point marina and Marsh Creek marina. Also grabbed our maintenance customers 25’ Regulator for his quarterly and bottom painting👊

Got a call from Marine warehouse on this last min detail on this 1991 whaler. She was looking ruff, and it needed to be done today. So I started it at 330 am and spend 2.5 hours on it cleaning her up. I mentioned the topside would take too much time to try and get right, but it’s probably to thin underneath the oxidation. So the best thing to do would be to leave it oxidized and even. Will detail the hull and put a shine on that along with cleaning up the metal. But that’ll be after breakfast😜

Well we just finished up on the hull of this 2012 27’ Onslow bay. We removed the name & logo’s. We did a 7 step process and now she looks new again. Will be taking care of the topside in a couple months after things start to slow a little. That’ll need the same amount of love to bring her back to life. Then we have a few others we detailed up this week. Now there ready to be maintained so they don’t loose there shine✨✨. We got this 32’ Edgewater in from some distance for our services👊. Goodnight😴

Detailing on this rainy Thursday🌨️

Just finished up on this 2019 22’ Seahunt. It sits up on the top rack at Marsh Creek marina and takes a beating from the sun. We loaded it up and worked on this one for 5 days. The topside was full of mildew, rust and layers of oxidation. The hull was really bad, so we had to remove the name and pinstripping before doing a 7 step process. When we finished our new customer couldn’t have been happier with its results. When spending the money he did to bring it back to life. Why not have a company that takes there time inside to turn things around the right way! I can promise you, it helps!! Now he can wax himself, but if he needs us to follow up we’re here…👍

Detailed up a few more this week, detailed up this 30’ Jupiter along with having Tony/Boat doc replace the caulking around the console. Then we grabbed this 23’ Scout from Marsh Creek marina for a full detail. Then we grabbed one of our maintenance boats from Middlesound marina. Lastly we knocked out the bottom paint to finish out this Wednesday.

Busy Monday 💪😎

So we got this 27’ Onslow Bay in for a detail. It was in pretty ruff shape. It was full of mildew, oxidation and lots of rashes & scratches on the hull. Jeffery took a full day washing it and getting it ready for its detailing. The first pic with the black chalk just shows you some of the scratches on the one side of the hull. The other side we had to sand 3/4 of the hull in order to remove most of the scratches. The others had to be block sanded by hand to remove. After finishing with hull for 2.5 days, he jumped on the topside which took 3 days as it needed to be compounded 3 times. Then we finished it up with a finishing material, then polishing and waxing, along with double waxing the trouble areas. We were happy with its final results as this one had a lot of surface to cover! We also got this 22’ Bay Rider in for a polish and wax and a few gel coat fixes. But after looking things over inside, I noticed it had a light shadow of oxidation & imperfections. So had the customer come in to show him what was going on with it. We then compounded it before applying polish and wax to do things properly. Also called Tony/Boat doc to come over and fix those issues. Now it’s looking better then new and can be waxed up on a quarterly timeline. Lastly we did a few of our maintenance boats as they were due for there quarterly details.

Well now that we have more space, I had to hire another detailer to keep things moving…..👊😎

Just finished up on this 28’ Axopar as it was really dirty along with having lots of oxidation on it. We also had to sand out quite a bit of rashes on the hull. But now things are back to where they need to be, PROTECTED!!

Finished the week off strong with the start this 28’ Axopar along with this Bayrider. Also bottom painted a few right before all the rain that’s coming. Reach out if you’d like to get your boat in for a detail or bottom painting. Have a great weekend!!