Mike's Bulletproof Vests

🔥 Balistic Light Weight Level 3 Plates 🔥

Level 3 Armscor Approved Stand Alone Plates now on special Until 1st of September or whilst stocks last 💯 R1250 PER SET, Price increase from 2nd of September due to steel price increase 💥

Each Level 3 Plate stops 223, 7.62 x 39, 7.62 x 51, 45, 40, 9mm, 22, etc

1x Plate will cost R625 Per Plate 🛍️

Use Discount Code - August Madness Sale 💪

We also Courier across SA and that is door to door postage with tracking so no need to worry about been in a different province, We have all your courier requirements sorted 📦

🔥🔥 Limited Edition Falcon Bulletproof Vests 🔥🔥

Our stock has finally arrived from Germany.

We only have 50x Units available in this design with the pouches, etc 💯

* Olive Green Falcon Vest with Molle Falcon Pouches - R2500 all inclusive.

* Olive Green Falcon Vest with Molle Falcon Pouches, 2x Level 3 Stand Alone Plates (Stops AK & 223) - R3500 all inclusive.

* Stand Alone Plates - (1x Set) - Certified to stop AK & 223 rounds - R1200 per set or take 2x Sets and get them at - R1100 per set.

Designed to be a Lightweight and versatile low-profile armour carrier, offering enhanced mobility without compromising protection. Plate pockets have been backed with 3D mesh for added ballistic performance, comfort and dispersal of body heat. The Plate Carrier comes standard with ladder style cummerbunds that attach to the front panel via 2x YKK Clips.
This allows rapid access when getting in and out of the Bulletproof Vest. The shoulders can be worn in 3 different configurations as a slick low profile with the addition of velcro padded shoulders and wrap around sleeve for hydration and comms channeling.
The Plate Carrier comes as standard with a removable Molle front flap held in place by 2 vertical SQM clips and strong heavy duty velcro which allows the panel to be removed and replaced with a wide variety of pre-configured weapon-specific pouch panels or Chest Rigs.

** Product Information **
· 1000 Denier water and abrasion resistant lightweight ballistic material.
· Fully equipped with (QRB) buckles on shoulder straps and on the cummerbund can be put on and taken off extremely quickly
· YKK nylon buckles for low sound closures.
· High tensile strength nylon webbing.
· LASER CUT MOLLE PANELS.
· High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread).
· High grade closed cell foam padding material for superior shock protection.
· Internal seams taped and finished.
· All Stress points double stitched, Bartacked or 'X Box' stitched for added strength.

For more information please feel to whatsapp us, First come first serve 🔥

🎉💥 FOUR YEAR BIRTHDAY BASH 💥🎉

2024 Molle Vest Design in Black

All sizes available - 4XL and above will have a price increase.

-- Vest will include --
* 4x individual Molle pouches of your choice.
* 2x Level 3 Balistic Front & Rear Plates.
* Molle Shoulder Straps.
* Molle Plate Carrier.
* Drag handle.

Manufacturing time frame is between 1 - 6 working days depending on size of order and other orders booked in beforehand.

Price -
For the month of JUNE - All Black Molle Bulletproof Vest With Plates & everything will be -
R2300 per Vest

Price will only be valid when using - #4 Year Birthday Bash 🎁

All vests come with a one year warranty (T&C's apply)

💥 Mike's Bulletproof Vests 💥
Please send us a screen shot of this post to have the discount applied 🛒
#

With our huge back log now sorted, we can start taking on new orders and bulk orders for a quicker turn around time. 🇿🇦

Drop us a message to find out our crazy April specials, Combo Specials and CPF/Farmers specials available now.

We at Mike's Bulletproof Vests support local Farmers, Communities and CPF groups to help grow the South African economy and to ensure everyone can afford a Bulletproof Vest no matter what.

We courier using for Country wide shipping so no matter where you situated, we have you covered. 🌍

💥 April Vest Special 💥

2024 Molle Vest Design in Black, Olive Green, Navy Blue, Green Camo or Khaki.

All sizes available - 4XL and above will have a price increase.

-- Vest will include --
* 4x individual Molle pouches of your choice.
* 2x Level 3 Balistic Front & Rear Plates.
* Molle Shoulder Straps.
* Molle Plate Carrier.
* Drag handle.

Manufacturing time frame is between 2 - 6 working days depending on size of order and other orders booked in beforehand.

Prices -
* 1x Bulletproof Vest with everything - R2500 each
* 2x Bulletproof Vest with everything - R2480 each
* 3x Bulletproof Vest with everything - R2450 each
* 4x Bulletproof Vest with everything - R2430 each
* 5x Bulletproof Vest with everything - R2400 each

All vests come with a one year warranty (T&C's apply)

💥 Mike's Bulletproof Vests 💥
Please send us a screen shot of this post to have the discount applied 🛒

🔥🔥🔥 DYNEEMA SPECIAL 🔥🔥🔥

We have massive specials currently on -
Level 2 & Level 3A Dyneema

What we offer with our Dyneema Range -
Panels
Full Wrap
Conceal Vests
Side Plates
Sappi cut Plates

Custom sizes (Depending on quantity)

🇿🇦

Dyneema is one of the most used polyethylene materials in bullet proof vests and according to DSM itself, Dyneema is up to 15 times stronger than steel, and 40% stronger than aramid fibers when considering the weight versus the strength. 🔥

Dyneema important facts -
10 year life span.
Water Resistant.
Stab Proof.
Flexible.
Light weight.

If you would like to enquire please whatsapp my team on -
0765276879 or drop us a message on Instagram and we will get back to you 📲

All us here at "Mike's Bulletproof Vests" are proud to announce that we will be sponsering again for his 2024 Racing season for both Nationals and Regionals 🏁🏍️

I've known Christian for many years and watching him grow and develop into the epic Racer that he is has been a privilege and we will continue to support and back him in everything that he does 🇿🇦

Keep going and looking forward to the season 🏁

MERRY CHRISTMAS 🎄

From all of us here at , we wish you a joyful and safe Christmas with your Family, Friend's & loved ones 🎊

Be safe & Be alert, For everyone traveling, please stay safe on the roads, remember to eat & Stay hydrated and we look forward to doing business in the new year 🇿🇦

New & Improved Tactical Vests 🔥

Molle Bulletproof Vest With Honeycomb Anti Sweat material ensuring you stay cooler with these hot days 🎊

We manufacture & sell Vests, Dyneema, Kevlar, Level 3 Stand Alone Plates and all types of Tactical Gear 🇿🇦

Massive Shout out to Daniel Hoile from again for the great customer service and efficiency 💯

And Thank you to - Clinton from CFAO Mobility - VW - The Glen for working a solid deal on my new VW Caddy 🇿🇦

Now I'm Race Ready for Nationals next year 🏍️🏁

🎉 MIKE'S BULLETPROOF VESTS 🎉

It's our Big Birthday Bash and this is our biggest one yet 🔥

Prices & Specials Valid from today up until the end of July or whilst stocks last 🤩

Get -

Option 1 -
1x Molle Bulletproof Vest With 2x Level 3 Plates and 4x Pouches all for only R2400

Option 2 -
1x Set of level 3 Plates for -
R1250

Option 3 -
Build your own type of Vests to your needs -
Price from R1350 & up

To redeem special please whatsapp us on -
Zero 765 276 879

And forward us a message saying - "Birthday Bash" 💯

New Stickers for our Big Birthday Bash coming up in July 🎂🎉 As Always ._44_ from did an amazing job with designing, Printing and packing everything swiftly to keep everything on track for us 💯

Please keep an eye on our business pages for birthday specials coming up soon 😎

🔥 Balistic Light Weight Level 3 Plates 🔥

Level 3 Armscor Approved Stand Alone Plates now on special Until 14th of May or whilst stocks last 💯 R1250 PER SET, Price increase from 1st of June due to steel price increase 💥

Each Level 3 Plate stops 223, 7.62 x 39, 7.62 x 51, 45, 40, 9mm, 22, etc

1x Plate will cost R625 Per Plate 🛍️

Use Discount Code - May Madness Sale 💪

We also Courier across SA and that is door to door postage with tracking so no need to worry about been in a different province, We have all your courier requirements sorted 📦

New K9 Dog Harnesses & Bulletproof Vests to protect the furry pups that protect us 🔥 If you wanting a price please drop us a message and we will get back to you 🇿🇦

New Business Logo for Mike's Bulletproof Vests and as always epic service, Quality & Assistance from Daniel Hoile from 🎉🔥💪🏼 For all your Stickers, Shirts, Gazebo, Cars, etc I highly recommend the guys 💯🏁

** 2023 Opening Special **

Front Flap Molle Bulletproof Vests With the option to detach the front Flap 🎉

Special Includes -
Molle Vest.
2x Level 3 Light Weight Plates Or Dyneema Inserts/Full Wrap.
Molle Shoulder Pads.
4x Molle Pouches (Your choice).
Velcro On The Front & Rear.
Front Flap Molle Rig.

All vests come with a 1 year warranty (T&C's apply)

Please like and share this advert 💪

⛄🎄 MERRY CHRISTMAS 🎄⛄

As a Thank you for another amazing year we are launching a special for the remaining month of December which is -

All Molle Black Bulletproof Vests now only - R2380 each 🎉

Special Includes -
Water Resistant Molle Vest.
2x Level 3 Light Weight Stand Alone Plates.
Molle Shoulder Pads.
4x Molle Pouches (Your choice).
Velcro On The Front & Rear for Logos, Patches, etc.

Minimum order of Two Vests 🌟

Special is valid from the 14th of December until the 1st of January 💣

Please like and share this advert 💪

🔥 BLACK FRIDAY SPECIAL 🔥

All Molle Bulletproof Vests now only - R2350 each 🎉

Special Includes -
Molle Vest.
2x Level 3 Light Weight Plates.
Shoulder Pads.
4x Molle Pouches (Your choice).
Velcro On The Front & Rear.

Minimum order of two Complete Vests 🌟

Special is valid from the 24th of November until the 30th of November 💣

Please like and share this advert 💪

We now manufacture all 3 levels of K9 Vests from Level 1 Dyneema up to Level 3A Dyneema 💯 Sizes from Pitbull up to great Dane, Please message us for prices and specs of the above vests 🎉 All vests are made out of 1200D Codura which is Ripstop and water resistant so no matter where you and your K9 best friend go the vest can go with. 🌟

** BACK BY POPULAR DEMAND **

Colours -
Green Camo, Black, Khaki

Sizes -
All Sizes in stock

** Falcon Limited Edition Imported Vests **

Designed to be a lightweight and versatile low-profile armour carrier, offering enhanced mobility without compromising protection. Plate pockets have been backed with 3D mesh for added ballistic performance, comfort and dispersal of body heat. The Plate Carrier comes standard with ladder style cummerbunds that attach to the front panel via 2 YKK Clips. This allows rapid access when getting in and out of the Bulletproof Vest. The shoulders can be worn in 3 different configurations as a slick low profile with the addition of velcro padded shoulders and wrap around sleeve for hydration and comms channeling. The Plate Carrier comes as standard with a removable MOLLE front flap held in place by 2 vertical SQM clips and strong velcro which allows the panel to be removed and replaced with a wide variety of pre-configured weapon-specific pouch panels or Chest Rigs.

** Product Materials **
1200 Codura, water and abrasion resistant lightweight ballistic material.
· Fully equipped with (QRB) buckles on shoulder straps and on the cummerbund can be put on and taken off extremely quickly.
· YKK nylon buckles for low sound closures.
· High tensile strength nylon webbing.
· LASER CUT MOLLE PANELS.
· High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread).
· High grade closed cell foam padding material for superior shock protection.
· Internal seams taped and finished.
· All Stress points double stitched, Bartacked or 'X Box' stitched for added strength.

💥 Mike's Bulletproof Vests 💥

Never mind Build a Bear - Now introducing -

* BUILD A VEST *

For a limited time offer you can now custom design what you want on your vest, what colours of each you would like and make it fully unique to yourself and stand out from the rest. 💣💯💥

Please feel free to contact us for further prices and information -

Promo Code is -
a Vest

Attached on the first picture is the prices we currently running for the special.

All our vests come with a one year warranty.

We courier across Southern Africa for your convenience.

T&C's apply and whilst stock's last

🇿🇦

🎉 Huge Sale Now on 🎉

Last remaining Black Falcon Bulletproof Vests in stock, only 3 left.

** Falcon Limited Edition Imported Vests **

Designed to be a lightweight and versatile low-profile armour carrier, offering enhanced mobility without compromising protection. Plate pockets have been backed with 3D mesh for added ballistic performance, comfort and dispersal of body heat. The Plate Carrier comes standard with ladder style cummerbunds that attach to the front panel via 2 YKK Clips. This allows rapid access when getting in and out of the Bulletproof Vest. The shoulders can be worn in 3 different configurations as a slick low profile with the addition of velcro padded shoulders and wrap around sleeve for hydration and comms channeling. The Plate Carrier comes as standard with a removable MOLLE front flap held in place by 2 vertical SQM clips and strong velcro which allows the panel to be removed and replaced with a wide variety of pre-configured weapon-specific pouch panels or Chest Rigs.

** Product Materials **
1000 Denier water and abrasion resistant lightweight ballistic material.
· Fully equipped with (QRB) buckles on shoulder straps and on the cummerbund can be put on and taken off extremely quickly.
· YKK nylon buckles for low sound closures.
· High tensile strength nylon webbing.
· LASER CUT MOLLE PANELS.
· High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread).
· High grade closed cell foam padding material for superior shock protection.
· Internal seams taped and finished.
· All Stress points double stitched, Bartacked or 'X Box' stitched for added strength.

💥 Mike's Bulletproof Vests 💥

Just a few differences between Kevlar and Dyneema 💯 Alot of people haven't heard about Dyneema but it is literally the best thing on the market currently 🎉 Check it out on Google or feel free to message my team for more information 🔫

** Is Dyneema waterproof? **

Dyneema is a waterproof material that doesn’t absorb liquids like other woven fabrics and nylon. This makes it perfect for producing tents, tarpaulin, Bulletproof Vests and backpacks.

** How strong is Dyneema? **

Dyneema is 15 times stronger than steel wire on a weight to weight basis. With minimum weight it scores higher on scales than other high strength materials with a tensile strength up to 43 cN/dtex. Dyneema also has a very high chemical and UV resistance.

Believe it or not, Dyneema is the world strongest fiber! It is classified as a high-performance polyethylene. While Dyneema doesn't hold up to friction heat very well, the fiber is as good as they come. Body armour, vehicle armour, Dyneema fiber in cut resistant gloves, the application and uses goes on and on.

Resistance to most chemicals.
Low density.
Invisible to ultra-violet light sources and thermal imaging devices.
Floats on water.
Smooth to the touch.
Fire resistant and self-extinguishing.
Can withstand extreme cold and hot temperatures.

💥Balistic Light Weight Level 3 Plates 💥
Level 3 Armscor Approved Plates now on special Until 31st of July or whilst stocks last 💯 R1250 PER SET, Price increase from 1st of August 💥

💥Balistic Light Weight Level 3 Plates 💥
Level 3 Armscor Approved Plates now on special Until 18th Of July or whilst stocks last 💯 R1300 PER SET, Price increase from 1st of August 💥

Massive Thanks to for the amazing work 🎉 Went to Moto Kustoms and spoke to and immediately he got to work on the design, within a hour I had the amazing design, made payment and the next day it was ready for collection 💥 If that's not great customer service then I don't know what is 💯 Guys, keep up the solid work

Please take note 🎉

We will be closed for Renovations from - Thursday (14th of July) until Wednesday (20th of July) ⏳🏡

All orders will need to be in at the latest - Thursday (7th of July) to ensure they will be done prior to our closing date 😄

We appreciate your understanding and big things to come once we open again 🤩

** Falcon Limited Edition Imported Vests **

Designed to be a lightweight and versatile low-profile armour carrier, offering enhanced mobility without compromising protection. Plate pockets have been backed with 3D mesh for added ballistic performance, comfort and dispersal of body heat. The Plate Carrier comes standard with ladder style cummerbunds that attach to the front panel via 2 YKK Clips. This allows rapid access when getting in and out of the Bulletproof Vest. The shoulders can be worn in 3 different configurations as a slick low profile with the addition of velcro padded shoulders and wrap around sleeve for hydration and comms channeling. The Plate Carrier comes as standard with a removable MOLLE front flap held in place by 2 vertical SQM clips and strong velcro which allows the panel to be removed and replaced with a wide variety of pre-configured weapon-specific pouch panels or Chest Rigs.

** Product Materials **
1000 Denier water and abrasion resistant lightweight ballistic material.
· Fully equipped with (QRB) buckles on shoulder straps and on the cummerbund can be put on and taken off extremely quickly.
· YKK nylon buckles for low sound closures.
· High tensile strength nylon webbing.
· LASER CUT MOLLE PANELS.
· High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread).
· High grade closed cell foam padding material for superior shock protection.
· Internal seams taped and finished.
· All Stress points double stitched, Bartacked or 'X Box' stitched for added strength.

💥 Mike's Bulletproof Vests 💥

We are back in action and at full swing 🎉

Please view our winter operating times as calls/messages won't be answered before or after opening/closing time ⌚

We supply Tactical gear, uniforms, combat boots, gloves, undercover vests, tactical vests, security vests, aswell as we have huge savings for CPF clients and farm watch clients too 🏡

So give us a shout or drop us a message and we will gladly assist

💥 Mike's Bulletproof Vests 💥

Please take note 🎉

We will be closed for Annual Leave, stock take from - Wednesday (25th of May) until Monday (13th of June) ⏳🏡

All orders will need to be in at the latest - Wednesday (18th of May) to ensure they will be done prior to our annual closing date 😄

We appreciate your understanding and big things to come once we open again 🤩