KLR Motorsport

We are now officially a Haltech dealer 😁

Little SR20 Machined up & assembled

- CP forged pistons
- Spool rods
- Big lift cams
- Plazmaman intake
- Garrett g35 turbo
- Artec exhaust manifold
- Ross trigger system

For all your engine building & mechanical needs DM via socials ☝️

Ugurcan's recently purchased VL Turbo in for some fresh fluids & Haltech ic7 dash install.

Although not making 600rwkw like the previous car we built him, this is definitely our favourite one.

KLR rb25/30 long block ready for bolt on's.
This arrived as a bare block now looking prettier than ever 👌🔥

Finishing off the year with some lines, fittings & bolt ons 👌

KLR built Rb25det, hydraulic head setup with 272/272 cams thanks to

We have had a massive year & looking forward to what next year brings us 👍

Early stages of prep work on this mighty little SR20 that we are doing.

Featuring rods, pistons , billet brace & main caps, solid head & a pte turbo to name a few.

All the good stuff for big HP & big RPM 👌

Yes we do "normal" cars 😆

For all general mechanical & log book servicing DM us via Facebook & Instagram

Some serious RB's in the build at the moment.

Our twin cam rb30's have fast become popular in the recent weeks 😎

One very special neo head amongst today's drop off that we are looking forward to the most.

From basic builds to 1500hp builds we do it all, For all enquiries DM us via Facebook or Instagram.

One more short block built & ready for our cylinder head package 👌

For all your engine needs DM us via Facebook & Instagram 😁

A change of pace from RB's today..
Beautiful C63s ready for pick up after replacing gigantic front & rear brake pads 👌

DM us via Instagram for all enquiries.

Su's Rb25det cylinder head in for a build using our favourite products.

272 cams, springs & cam gears 👌

Some Haltech goodies ready to be wired in for a customers R33

Not only do we supply Haltech products, we also wire in & tune.

For all enquiries DM us via Facebook & Instagram 👍

Ali's 25/30 complete & ready for pick up 💪

We did the following:
-Rebuilt rb30 bottom end with ACL coated bearings, all new seals, gaskets
- Nitto oil pump & collar
- Acid washed, Decked & honed.

- Rb25det cylinder head freshened up
- Exhaust side Ported
- Nitto head drain
- Kelford 272 cams 🤤
- kelford height matched valve springs
- Tomei head gasket etc etc

All work done in house apart from cylinder head deck 😄

This will be one awesome s13 once it's completed.

Keep an eye out for the next RB30 going on the engine stand.

For all enquiries DM us via Facebook & Instagram

Rb30 built & now ready for our rb25 cylinder head package.

Plenty of fruit going into this one 👌

Another RB short block rebuilt & ready for pick up!

Up next is a rb25/30 with variable cam timing 👌

Rb25det almost ready for assembly 👌

Last one for the week, now ready for pick up 😅

- Fuel system upgrade
- Ignition system upgrade
- Cooling system upgrade
- Fresh fluids
- Full check up

For all enquiries DM us via Instagram or Facebook 👍

Ali's Rb25det powered s13 ready for pick up 👌

- Electrical issues sorted ✅
- Complete check up ✅
- Minor service ✅
- Ic7 setup ✅

Ready to be put back on dyno & turned up ☝️

For all enquiries DM us via Facebook & Instagram

XR6 turbo in for 90,000km log book service, one of the cleanest examples I have seen in a long time 👌

Fady's Rb25det long motor rebuild completed & now ready for bolt on's.

-ACL Calico main bearings
-ACL Calico rod bearings
-New piston ring set
-ARP 2000 head studs
-Tomei metal head gasket
-Complete Cylinder head service
-Kelford 264/272 VCT cams & kelford valve springs 👌

Jeep SRT in for some work before hitting the dyno, already making close to 600hp this makes one awesome daily. 👌

Haltech IC-7 wire in & setup all done ☑️

DM for all your Haltech needs

Adam's Scirocco R in for a set of rotor's & pads thanks to .

Gigantic 345mm front rotors & 310mm rear rotors sure have some stopping power 💪

Immaculate VF GTS LSA in for a routine service & check up 👌

FG Xr6 turbo in for some work

Engine service ☑️
New rocker cover gasket ☑️
Check up ☑️
Walbro 460 fuel pump☑️

KLR Motorsport is happy to announce that we can now be found on Facebook & Instagram, we will be sharing some of current and previous jobs in the coming days.

We will be focusing on
- General servicing
- Mechanical repairs
- Motorsport/High performance builds

DM for all enquires 👍

KLR Motorsport updated their business hours.