Height Safety Engineers

Height Safety Engineers modular ladder systems permit economical and visually attractive installations in any application where permanent access is required between levels at a place of work.

Rung Type

Step Type

Fold-down Systems

Guardrail Systems

Height Safety Engineers Modular handrail systems offer quick and simple on site installation, using fully adjustable fittings and components.

Fall Arrest Systems

Height Safety Engineers supplies and installs permanent fall arrest systems of the highest quality and compliance standards. Height Safety Engineers guarantees economical solutions which meet legislative requirements without compromise on compliance.

For more information on Height Safety Systems, click here.

Height Safety & Confined Space

HSE has trained auditors that can attend your site & perform a total risk analysis for all working at heights and/or confined space activities.

We evaluate risk factors though surveying the site and communicating with the people that require access to these areas.

We provide a full Risk Analysis Audit Report with solutions to each and every issue, to ensure that building owners and managers can have peace of mind regarding the safety and compliance of the premises under their control.

Why should I have my roof access system certified?

WHS legislation and Australian Standards require Fall Arrest Equipment to be inspected & certified by a suitably competent person prior to first use and then on a regular basis. This inspection and certification is to ensure the equipment is correctly installed in accordance with manufacturer’s instructions. It is also important to ensure the structure to which an anchor is attached is adequate for the imposed loads, & has not been modified and/or deteriorated in any way that affects the structural integrity of systems.

How often should I have this done?

Australian Standards require that inspection intervals be in accordance with the manufacturer’s recommendations. As a general rule these recommended intervals are as follows:

Fall Arrest Anchors – Annually

Horizontal Lifelines – Annually

In the absence of any recommendation the interval shall be annually

How we can help you?

All inspections are carried out in accordance with AS/NZS 1891-2009 Part 4 Section 9. In the case of fixed Anchorages and Static lines covered by Part 9-3-3, the inspection /recertification includes, but is not limited to the following:

The inspection interval for anchorages shall be every 12 months.

Anchorages shall be visually inspected for signs of deterioration which might make them unserviceable together with any other requirements contained in manufacturer’s instructions.

The parent structure shall also be visually inspected for modifications or deterioration which might lead to loss of anchorage. Anchors such as friction or glued in anchorages shall be proof tested in accordance with Clause 3.1.2 (g) as part of each inspection

Height Safety Engineers offers this recertification service to our clients based on a very reasonable schedule of rates. We endeavor to carry out all works in the most economical manner possible and without compromising compliance within all legislative guidelines. We provide quality proposals on request based on individual site requirements and recommended solutions.

Height Safety Engineers is a Registered Training Organisation. We specialise in offering quality training to construction and safety industry. We have a world-class training facility at our headquarters in NSW, along with training centres in Dubbo NSW, Melbourne Victoria, or we can bring the training to you.

HSE is a leading provider of height safety and confined space training courses in Australia. All our training courses are delivered by highly skilled and qualified trainers. Height Safety Engineers training facility offers a wide variety of practical hands on experience in a safe and controlled environment.

We train both on our premises (morning tea & lunch provided) or we can travel to you & train you on your site.

CONFINED SPACES

All training is nationally accredited and covers the following topics:

Confined space legislation

Confined space hazards

Confined space risk assessments and entry permits

Selection, fit, use and maintenance of confined space safety equipment

Atmospheric monitoring

Emergency procedures and fire protection

WORK SAFELY AT HEIGHTS

This course has a comprehensive coverage of the following:

Height Safety legislation

Effective controls to reduce fall risks

Assessment of working at height risks

Identify & implement risk control measures

Suspension intolerance trauma and identify first response rescue needs

All training in accordance with relevant WHS legislation, codes of practice and Australian Standards.

PPE Sales

Height Safety Engineers can supply individual buyers or businesses with a wide range of personal protective equipment (PPE).

We carefully evaluate and select our suppliers, so you can be sure any PPE you select is of the highest-quality. Our expert staff can assist and support you in putting together PPE kits that provide best practice safety for whatever situation you or your staff will be working in.

Height Safety Engineers can also ensure your PPE fits perfectly and is comfortable to wear while you work.

PPE Biannual Inspections

Height Safety Engineers can provide PPE users with their biannual (twice a year, every six months) inspections of soft goods.

Under Australian law, PPE items including harnesses, ropes, lanyards, shock absorbers, pole straps, rescue equipment and other items need to be inspected by every six (6) months.

Our trained experts can carry out these inspections and provide you with a digital register of PPE equipment to help maintain your compliance and best practice.